AEEA Free Softener Cationic Flakes For Printing And Dyeing Factory
Chemical Composition: Fatty acid amide compound
|Appearance:||pale yellow flakes|
|pH Value:||3~5 (5~10% solution)|
1. Add the flakes in water (30℃) gradually in the proportion of
5~10%, stir them for 3~5 mins, then heat up to 65~70℃ and stir them
again until the flakes become an even paste, then cool it down.
|1. Impart very soft, fluffy and full handle to fabric|
|2. Good salt and alkali resistance|
|3. Low foaming|
|4. AEEA free|
|5. Meet the Oeko-tex Standard 100 (2011 version), also in line with
the EU "REACH" regulations that promulgated by 138 "Substances of
Very High Concern" (SVHC) requirements|
Field of Application: Suitable for the finishing treatment of cotton, hemp, silk,
chemical fibre, yarn and blended fabrics; and also for denim and a
variety of clothing, especially for printing and dyeing factory.
1. Padding: Dosage: 20~30g/L (10% solution)
Process: one dip and one pad or two dips and two pads
2. Dipping: Dosage: 3~8% (o.w.f) (10% solution)
Liquor Ratio: 1:10~15
Time: 30 mins
Storage and Packing:
1. Shelf life: 12 months when store in cool, dry and shaded
2. Packing: 25kg plastic woven bag
Notice: Compatibility of other auxiliaries and process need to be
checked before application.
Global Chemicals, founded in 1992 in HK, with factory located in Guangdong, China,
is one of the biggest manufacturers and exporters of textile
auxiliaries in China, specialized in textile finishing
chemicals.Our products mainly include softener flakes (cationic, anionic and nonionic), silicones (amino
and block co-polymer) and textile enzymes for different kinds of washing and dyeing factories. Most of our
products are SGS, REACH and GOTS certificated.